Niko Steel Centre is a prominent manufacturer, supplier and exporter of Hastelloy Bars in South Korea. These Square Bars are available in variety standard and customized measurements to our customers. We have installed advanced equipment, for producing these bars, which results in accurate and exact dimensions.
Hastelloy is a wrought Ni Cr and Mo alloy that is widely regarded as the most adaptable corrosion-resistant alloy. Hastelloy C276 Bright Bar is an ideal choice for general resistant to corrosion applications, Hastelloy C22 Bright Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are sold to our esteemed clients in several diameters, wall thicknesses, and at very fair rates. These Round Bars are widely used in the paper and pulp factories, as well as these Hex Bars are in huge demand in digesters. They are also be seen in equipment used for sour gas or flue gas desulfurization. These Rods can also be found in evaporators and heat exchangers, as well as filtration units and mixers.
Table Of Content
These Hastelloy X Bright Bars are resistant to the production of grain boundary precipitates in the welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing environments up to 1900 degree Fahrenheit. Alloy C-276 is immensely resistant to a wide range of chemical conditions. This Hastelloy X can be forged, hot-upset and impact extruded. In fact this alloy tends to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding methods can be employed, albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy B3 Square Bar can also be utilized in industries where chlorine is often employed. In fact, the Rods are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in several industrial uses, Hastelloy B2 Hex Bars are used in damp chlorine gas environments due to its resistance characteristic.
Here at Niko Steel Centre test these products before they are delivered to our customers, assuring that fabricated products do not have any damages and are truly ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our C22 Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi B2 Hastelloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
B2 Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
B2 Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Alloy X Hex Bars
US $2000-3000 / Ton (FOB Price)
X Nickel Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Nickel Alloy B3 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI X Forged Hastelloy Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Alloy C22 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C276 Bright Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
C22 Nickel Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright X Nickel Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Hastelloy C276 Bar & Hastelloy C276 Rods To More Than 30 Locations Worldwide, Check Alloy B2 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N10665 Bars In Seoul, South Korea.
Alloy C22 Bars are used in manufacturing Fasteners, construction materials, medical equipment, auto parts, petroleum, chemical application, agricultural irrigation, edible oil refinery factories, paper and pulp industry, marine applications, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
![]() ![]() Indonesia |
![]() ![]() Iran |
![]() ![]() Malaysia |
![]() ![]() Singapore |
![]() ![]() Iraq |
![]() ![]() Oman |
![]() ![]() Saudi Arabia |
![]() ![]() Qatar |
![]() ![]() Nigeria |
![]() ![]() UAE |
![]() ![]() Kenya |
![]() ![]() South Africa |