Niko Steel Centre is a prominent manufacturer, supplier and exporter of Hastelloy Bars in Kuwait. These Bright Bars are accessible in variety grade and customized dimensions to our customers. We have installed advanced machinery, for producing these bars, which results in correct and exact dimensions.
Hastelloy is a wrought Nickel-Chromium-Molybdenum alloy that is extensively regarded as the more suitable corrosion-resistant alloy. Hastelloy C22 Round Bar is ideally suited for general corrosion-resistant applications, Hastelloy B3 Bright Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are sold to our esteemed customers in several sizes, wall thicknesses, and at very reasonable rates. These Round Bars are extensively used in the paper and pulp industries, as well as these Round Bars are in large-scale in digesters. They are also be seen in machinery used for sour gas or flue gas desulfurization. These Forged Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy B2 Bright Bars are resistant to the fabrication of grain boundary precipitates in the welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 degree F. Alloy C-276 is extremely resistant to a wide range of acidic conditions. This Hastelloy B2 can be forged, hot-upset and impact extruded. In fact this alloy tends to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding procedures can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy C22 Forged Bar can also be utilized in industries where chlorine is often employed. In fact, the Hex Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in many industrial applications, Hastelloy C22 Rods are utilized in damp chlorine gas areas because of their resistance characteristic.
Here at Niko Steel Centre inspect these bars prior they are sent to our clients, assuring that manufactured products don’t bear any damages and are completely ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our B3 Nickel Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
X Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi B3 Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
C22 Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
C276 Nickel Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Alloy C22 Hex Bars
US $2000-3000 / Ton (FOB Price)
B3 Hastelloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Nickel Alloy C22 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI X Forged Nickel Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Alloy B2 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
B3 Bright Hastelloy Round Bar
US $1000-3000 / Ton (FOB Price)
B3 Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright B2 Nickel Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Alloy X Bar & Alloy X Rods To More Than 30 Locations Worldwide, Check Hastelloy Alloy C22 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N10665 Bars In Sabah as Salim, Kuwait.
Hastelloy Alloy B3 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, petrochemical application, agricultural irrigation, oil and gas industry, paper and pulp industry, marine applications, power generation, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |