Niko Steel Centre is a prominent producer , distributor and exporter of Hastelloy Bars in Nigeria. These Round Bars are available in variety standard and customized measurements to our customers. We have installed cutting edge machinery, for making these bars, which results in accurate and precise dimensions.
Hastelloy is considered a wrought Ni Cr and Mo alloy that is extensively considered as the more suitable corrosion-resistant alloy. Hastelloy C276 Rod is ideally suited for general corrosion-resistant applications, Hastelloy C276 Square Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are sold to our esteemed customers in a variety of diameters, wall thicknesses, and at very fair prices. These Hexagon Bars are extensively used in the paper and pulp industries, as well as these Hexagon Bars are in huge demand in digesters. They are also be seen in equipment used for sour gas or flue gas desulfurization. These Forged Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
Table Of Content
These Hastelloy C276 Round Bars are resistant to the fabrication of grain boundary caused during welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing environments up to 1900 ° Fahrenheit. Alloy C-276 is immensely resistant to a wide range of chemical conditions. This Hastelloy C276 can be forged, hot-upset and impact extruded. In fact this alloy contributes to work-harden, it may be deep-drawn, press shaped, or punched satisfactorily. All typical welding methods can be employed, albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy C276 Hex Bar can also be utilized in industries where chlorine is often employed. In fact, the Hexagon Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Moreover, in several industrial uses, Hastelloy B2 Square Bars are used in damp chlorine gas environments due to its resistance characteristic.
Here at Niko Steel Centre test these products prior they are delivered to our customers, assuring that fabricated products don’t bear any destructions and are truly ready for it’s operation.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our C276 Hastelloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi B3 Nickel Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
B2 Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
X Nickel Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Hastelloy X Hex Bars
US $2000-3000 / Ton (FOB Price)
B2 Nickel Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Alloy C276 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI X Forged Nickel Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Nickel Alloy B3 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
B2 Bright Nickel Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
B3 Hastelloy Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright B2 Nickel Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Nickel Alloy C276 Bar & Alloy X Rods To More Than 30 Locations Worldwide, Check Hastelloy C276 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N06002 Bars In Abuja, Nigeria.
Nickel Alloy B2 Bars are used in manufacturing Fasteners, construction materials, medical equipment, auto parts, petroleum, chemical application, agricultural irrigation, edible oil refinery factories, paper and pulp industry, shipyard, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |