Niko Steel Centre is a leading producer , supplier and exporter of Hastelloy Bars in Algeria. These Round Bars are available in variety standard and bespoken dimensions to our customers. We have fixed cutting edge tools and technology, for making these bars, which results in correct and precise measurements.
Hastelloy is a wrought Nickel-Chromium-Molybdenum alloy that is widely considered as the most adaptable corrosion-resistant alloy. Hastelloy C276 Bright Bar is ideally suited for general resistant to corrosion applications, Hastelloy X Forged Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are available to our esteemed clients in a variety of sizes, widths, and at very reasonable prices. These Round Bars are widely used in the paper and pulp industries, as well as these Hexagon Bars are in huge demand in digesters. They are also be seen in equipment used for sour gas or flue gas desulfurization. These Bright Bars can also be found in evaporators and heat exchangers, as well as filtration units and mixers.
Table Of Content
These Hastelloy C22 Rods are resistant to the production of grain boundary caused during welding heat-affected zone, making it particular for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing environments up to 1900 degree F. Alloy C-276 is immensely resistant to a wide range of acidic conditions. This Hastelloy B2 can be forged, hot-upset and impact extruded. Despite the fact that the alloy tends to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding procedures can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy B3 Bright Bar can also be utilized in industries where chlorine is often employed. In fact, the Rods are one such alloy that works well with hypochlorite and chlorine dioxide. Moreover, in several industrial uses, Hastelloy B2 Round Bars are used in moist chlorine gas environments because of their resistance property.
Here at Niko Steel Centre inspect these bars before they are offered to our clients, assuring that manufactured products do not have any destructions and are truly ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our B2 Nickel Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Nickel Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi C22 Hastelloy Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
B2 Hastelloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
X Hastelloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Alloy B3 Hex Bars
US $2000-3000 / Ton (FOB Price)
C276 Hastelloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy Alloy B3 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI B3 Forged Hastelloy Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Hastelloy X Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C276 Bright Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
B2 Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright C22 Hastelloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Alloy X Bar & Alloy B2 Rods To More Than 30 Locations Worldwide, Check Hastelloy Alloy C276 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N10665 Bars In Algiers, Algeria.
Hastelloy Alloy C22 Bars are used in manufacturing Fasteners, construction materials, medical equipment, auto parts, petroleum, petrochemical application, agricultural irrigation, edible oil refinery factories, paper and pulp industry, marine applications, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |