Niko Steel Centre is a prominent producer , supplier and stockiest of Hastelloy Bars in Germany. These Round Bars are accessible in variety grade and customized measurements to our customers. We have installed advanced tools and technology, for producing these bars, which results in correct and exact dimensions.
Hastelloy is considered a wrought Ni Cr and Mo alloy that is extensively considered as the more adaptable corrosion-resistant alloy. Hastelloy B2 Hexagon Bar is an ideal choice for general resistant to corrosion uses, Hastelloy X Rods are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are available to our esteemed clients in several diameters, wall thicknesses, and at very reasonable rates. These Rods are widely used in the paper and pulp industries, as well as these Round Bars are in huge demand in digesters. They are also be seen in machinery used for sour gas or flue gas desulfurization. These Square Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy B2 Hexagon Bars are resistant to the fabrication of grain boundary precipitates in the welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 degree Fahrenheit. Alloy C-276 is immensely resistant to a broad range of acidic conditions. This Hastelloy C22 can be forged, hot-upset and impact extruded. In fact this alloy tends to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding procedures can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy X Hex Bar can also be utilized in industries where chlorine is often employed. In fact, the Square Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Moreover, in several industrial uses, Hastelloy B3 Square Bars are used in moist chlorine gas environments due to its resistance property.
Here at Niko Steel Centre inspect these bars prior they are sent to our customers, assuring that fabricated products do not have any damages and are truly ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our C276 Nickel Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
X Hastelloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi X Nickel Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
B3 Hastelloy Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
X Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Nickel Alloy B2 Hex Bars
US $2000-3000 / Ton (FOB Price)
B3 Hastelloy Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy Alloy B2 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI C276 Forged Hastelloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Nickel Alloy B3 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
B2 Bright Hastelloy Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
C276 Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright C276 Nickel Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Alloy C276 Bar & Hastelloy B3 Rods To More Than 30 Locations Worldwide, Check Hastelloy Alloy C22 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N06022 Bars In Berlin, Germany.
Nickel Alloy B2 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, chemical application, agricultural irrigation, oil and gas industry, paper plants, marine applications, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
![]() ![]() Indonesia |
![]() ![]() Iran |
![]() ![]() Malaysia |
![]() ![]() Singapore |
![]() ![]() Iraq |
![]() ![]() Oman |
![]() ![]() Saudi Arabia |
![]() ![]() Qatar |
![]() ![]() Nigeria |
![]() ![]() UAE |
![]() ![]() Kenya |
![]() ![]() South Africa |