Niko Steel Centre is a leading manufacturer, distributor and exporter of Hastelloy Bars in South Africa. These Hexagon Bars are available in variety grade and bespoken measurements to our clients. We have installed advanced machinery, for producing these bars, which results in accurate and exact measurements.
Hastelloy is a wrought Nickel-Chromium-Molybdenum alloy that is extensively regarded as the most suitable corrosion-resistant alloy. Hastelloy C22 Round Bar is ideally suited for general corrosion-resistant applications, Hastelloy B3 Hex Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are available to our esteemed clients in several sizes, wall thicknesses, and at very reasonable rates. These Rods are extensively used in the paper and pulp factories, as well as these Rods are in large-scale in digesters. They are also be seen in equipment used for sour gas or flue gas desulfurization. These Rods can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
Table Of Content
These Hastelloy C276 Hex Bars are resistant to the production of grain boundary caused during welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 degree F. Alloy C-276 is immensely resistant to a wide range of chemical environments. This Hastelloy C22 can be forged, hot-upset and impact extruded. Despite the fact that the alloy tends to work-harden, it may be deep-drawn, press shaped, or punched satisfactorily. All typical welding procedures can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy X Hexagon Bar can also be utilized in industries where chlorine is often employed. In fact, the Rods are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in several industrial uses, Hastelloy X Round Bars are used in damp chlorine gas areas because of their resistance characteristic.
Here at Niko Steel Centre test these products before they are offered to our clients, ensuring that fabricated products do not have any damages and are completely ready for it’s operation.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our B2 Hastelloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Nickel Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi B3 Nickel Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
X Hastelloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
B2 Nickel Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Alloy B2 Hex Bars
US $2000-3000 / Ton (FOB Price)
C22 Hastelloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy Alloy B3 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI X Forged Nickel Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Alloy C22 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
B2 Bright Nickel Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
C276 Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright B3 Nickel Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Nickel Alloy B2 Bar & Alloy C22 Rods To More Than 30 Locations Worldwide, Check Hastelloy Alloy X Round Bar Schedule Chart, Compare Prices Before You Buy UNS N06002 Bars In Cape Town, South Africa.
Nickel Alloy C22 Bars are used in manufacturing Fasteners, construction materials, medical equipment, auto parts, petroleum, petrochemical application, agricultural irrigation, edible oil refinery factories, paper plants, marine applications, power generation, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
![]() ![]() Indonesia |
![]() ![]() Iran |
![]() ![]() Malaysia |
![]() ![]() Singapore |
![]() ![]() Iraq |
![]() ![]() Oman |
![]() ![]() Saudi Arabia |
![]() ![]() Qatar |
![]() ![]() Nigeria |
![]() ![]() UAE |
![]() ![]() Kenya |
![]() ![]() South Africa |