Niko Steel Centre is a leading manufacturer, distributor and exporter of Hastelloy Bars in Canada. These Hexagon Bars are available in many standard and bespoken measurements to our clients. We have fixed advanced tools and technology, for fabricating these bars, which results in correct and exact dimensions.
Hastelloy is considered a wrought Ni Cr and Mo alloy that is widely considered as the most suitable corrosion-resistant alloy. Hastelloy C22 Forged Bar is ideally suited for general resistant to corrosion applications, Hastelloy X Forged Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are available to our esteemed clients in a variety of diameters, wall thicknesses, and at very reasonable rates. These Rods are extensively utilized in the paper and pulp industries, as well as these Forged Bars are in large-scale in digesters. They are also be seen in machinery used for sour gas or flue gas desulfurization. These Bright Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy X Round Bars are resistant to the fabrication of grain boundary caused during welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 degree Fahrenheit. Alloy C-276 is extremely resistant to a broad range of chemical environments. This Hastelloy B3 can be forged, hot-upset and impact extruded. In fact this alloy tends to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding procedures can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy C22 Rod can also be utilized in industries where chlorine is often employed. In fact, the Bright Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in many industrial uses, Hastelloy B2 Square Bars are utilized in moist chlorine gas areas because of their resistance characteristic.
Here at Niko Steel Centre test these bars prior they are offered to our clients, assuring that fabricated products do not have any destructions and are completely ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our B3 Nickel Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Nickel Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi C276 Nickel Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
X Hastelloy Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
C22 Nickel Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Nickel Alloy C276 Hex Bars
US $2000-3000 / Ton (FOB Price)
B3 Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy X Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI B2 Forged Hastelloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Nickel Alloy X Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C22 Bright Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
B2 Hastelloy Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright B3 Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Alloy C22 Bar & Hastelloy B2 Rods To More Than 30 Locations Worldwide, Check Hastelloy Alloy B3 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N06002 Bars In Ottawa, Canada.
Nickel Alloy X Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, petrochemical application, agricultural irrigation, edible oil refinery factories, paper plants, shipyard, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |