Niko Steel Centre is a leading manufacturer, supplier and exporter of Hastelloy Bars in Indonesia. These Round Bars are accessible in many grade and bespoken dimensions to our clients. We have installed advanced equipment, for fabricating these bars, which results in accurate and exact measurements.
Hastelloy is a wrought Ni Cr and Mo alloy that is widely considered as the more suitable corrosion-resistant alloy. Hastelloy X Round Bar is an ideal choice for general corrosion-resistant uses, Hastelloy X Square Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are available to our valued customers in a variety of sizes, widths, and at very reasonable prices. These Hexagon Bars are widely used in the paper and pulp factories, as well as these Rods are in large-scale in digesters. They are also be found in equipment used for sour gas or flue gas desulfurization. These Forged Bars can also be found in evaporators and heat exchangers, as well as filtration units and mixers.
Table Of Content
These Hastelloy X Hex Bars are resistant to the fabrication of grain boundary precipitates in the welding heat-affected zone, making it particular for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing environments up to 1900 ° Fahrenheit. Alloy C-276 is immensely resistant to a broad range of chemical conditions. This Hastelloy C276 can be forged, hot-upset and impact extruded. In fact this alloy tends to work-harden, it may be deep-drawn, press shaped, or punched satisfactorily. All typical welding methods can be employed, albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy X Rod can also be utilized in industries where chlorine is often employed. In fact, the Hex Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Moreover, in many industrial uses, Hastelloy B3 Square Bars are utilized in moist chlorine gas environments due to its resistance characteristic.
Here at Niko Steel Centre inspect these products before they are offered to our clients, ensuring that fabricated products do not have any damages and are completely ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our C22 Hastelloy Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Nickel Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi X Hastelloy Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
C276 Hastelloy Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
B3 Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Hastelloy B2 Hex Bars
US $2000-3000 / Ton (FOB Price)
C276 Hastelloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy Alloy C276 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI X Forged Nickel Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Nickel Alloy B3 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C22 Bright Hastelloy Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
B3 Hastelloy Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright X Nickel Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Nickel Alloy X Bar & Alloy C22 Rods To More Than 30 Locations Worldwide, Check Hastelloy B3 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N10675 Bars In Jakarta, Indonesia.
Nickel Alloy C22 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, chemical application, agricultural irrigation, oil and gas industry, paper plants, marine applications, power generation, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
![]() ![]() Indonesia |
![]() ![]() Iran |
![]() ![]() Malaysia |
![]() ![]() Singapore |
![]() ![]() Iraq |
![]() ![]() Oman |
![]() ![]() Saudi Arabia |
![]() ![]() Qatar |
![]() ![]() Nigeria |
![]() ![]() UAE |
![]() ![]() Kenya |
![]() ![]() South Africa |