Niko Steel Centre is a respected manufacturer, supplier and exporter of Hastelloy Bars in Egypt. These Hex Bars are available in variety grade and bespoken measurements to our clients. We have fixed modern equipment, for making these bars, which results in correct and precise dimensions.
Hastelloy is considered a wrought Ni Cr and Mo alloy that is widely considered as the most adaptable corrosion-resistant alloy. Hastelloy B3 Bright Bar is ideally suited for general corrosion-resistant applications, Hastelloy C22 Rods are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are sold to our esteemed customers in several sizes, wall thicknesses, and at very fair rates. These Round Bars are widely used in the paper and pulp factories, as well as these Rods are in large-scale in digesters. They are also be found in machinery used for sour gas or flue gas desulfurization. These Forged Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy C276 Square Bars are resistant to the fabrication of grain boundary precipitates in the welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 degree Fahrenheit. Alloy C-276 is extremely resistant to a wide range of acidic environments. This Hastelloy B2 can be forged, hot-upset and impact extruded. Despite the fact that the alloy contributes to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding methods can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy X Round Bar can also be utilized in industries where chlorine is often employed. In fact, the Round Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Moreover, in several industrial uses, Hastelloy C22 Bright Bars are used in moist chlorine gas areas due to its resistance characteristic.
Here at Niko Steel Centre inspect these bars before they are offered to our clients, assuring that manufactured products don’t bear any damages and are truly ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our X Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
X Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi B3 Hastelloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
X Nickel Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
C22 Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Alloy C276 Hex Bars
US $2000-3000 / Ton (FOB Price)
B3 Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Nickel Alloy B3 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI B3 Forged Hastelloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Hastelloy B2 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C276 Bright Nickel Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
C22 Hastelloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright B2 Nickel Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Hastelloy Alloy C276 Bar & Nickel Alloy B2 Rods To More Than 30 Locations Worldwide, Check Nickel Alloy X Round Bar Schedule Chart, Compare Prices Before You Buy UNS N06022 Bars In Cairo, Egypt.
Hastelloy C276 Bars are used in manufacturing Fasteners, construction materials, medical equipment, auto parts, petroleum, chemical application, agricultural irrigation, edible oil refinery factories, paper and pulp industry, shipyard, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |