Niko Steel Centre is a notable manufacturer, distributor and exporter of Hastelloy Bars in Qatar. These Hexagon Bars are accessible in variety standard and customized dimensions to our clients. We have installed cutting edge machinery, for fabricating these bars, which results in correct and exact measurements.
Hastelloy is considered a wrought Nickel-Chromium-Molybdenum alloy that is extensively considered as the more adaptable corrosion-resistant alloy. Hastelloy X Bright Bar is ideally suited for general corrosion-resistant uses, Hastelloy X Round Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are available to our valued customers in a variety of sizes, widths, and at very fair rates. These Hexagon Bars are extensively utilized in the paper and pulp industries, as well as these Rods are in huge demand in digesters. They are also be found in equipment used for sour gas or flue gas desulfurization. These Forged Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy C276 Hexagon Bars are resistant to the fabrication of grain boundary precipitates in the welding heat-affected zone, making it appropriate for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 ° F. Alloy C-276 is immensely resistant to a broad range of chemical conditions. This Hastelloy B3 can be forged, hot-upset and impact extruded. Despite the fact that the alloy tends to work-harden, it may be deep-drawn, press shaped, or punched satisfactorily. All typical welding procedures can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy C276 Forged Bar can also be utilized in industries where chlorine is often employed. In fact, the Round Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in many industrial applications, Hastelloy C276 Bright Bars are utilized in damp chlorine gas environments because of their resistance characteristic.
Here at Niko Steel Centre inspect these products before they are offered to our customers, assuring that fabricated products don’t bear any destructions and are truly ready for it’s operation.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our B3 Hastelloy Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Hastelloy Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi B2 Nickel Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
C22 Hastelloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
C22 Hastelloy Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Hastelloy C276 Hex Bars
US $2000-3000 / Ton (FOB Price)
C22 Nickel Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy X Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI C276 Forged Hastelloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Hastelloy B3 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C22 Bright Hastelloy Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
X Nickel Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright B2 Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Alloy X Bar & Hastelloy Alloy C276 Rods To More Than 30 Locations Worldwide, Check Nickel Alloy B3 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N06002 Bars In Doha, Qatar.
Hastelloy B3 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, chemical application, agricultural irrigation, edible oil refinery factories, paper plants, marine applications, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
![]() ![]() Indonesia |
![]() ![]() Iran |
![]() ![]() Malaysia |
![]() ![]() Singapore |
![]() ![]() Iraq |
![]() ![]() Oman |
![]() ![]() Saudi Arabia |
![]() ![]() Qatar |
![]() ![]() Nigeria |
![]() ![]() UAE |
![]() ![]() Kenya |
![]() ![]() South Africa |