Niko Steel Centre is a notable producer , supplier and exporter of Hastelloy Bars in Nepal. These Rods are accessible in variety standard and customized dimensions to our customers. We have installed cutting edge equipment, for fabricating these bars, which results in correct and precise measurements.
Hastelloy is a wrought Ni Cr and Mo alloy that is extensively considered as the more suitable corrosion-resistant alloy. Hastelloy C276 Rod is an ideal choice for general resistant to corrosion uses, Hastelloy B3 Square Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are sold to our esteemed clients in a variety of diameters, widths, and at very reasonable prices. These Hex Bars are extensively utilized in the paper and pulp industries, as well as these Hexagon Bars are in huge demand in digesters. They are also be seen in equipment used for sour gas or flue gas desulfurization. These Bright Bars can also be found in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy C276 Rods are resistant to the fabrication of grain boundary precipitates in the welding heat-affected zone, making it particular for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 ° Fahrenheit. Alloy C-276 is immensely resistant to a broad range of chemical environments. This Hastelloy B2 can be forged, hot-upset and impact extruded. Despite the fact that the alloy contributes to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding procedures can be employed, albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy C276 Hex Bar can also be utilized in industries where chlorine is often employed. In fact, the Square Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in many industrial applications, Hastelloy C22 Square Bars are utilized in damp chlorine gas areas due to its resistance property.
Here at Niko Steel Centre test these products prior they are offered to our customers, assuring that fabricated products do not have any damages and are completely ready for it’s operation.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our B2 Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
B3 Hastelloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi C22 Hastelloy Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
B2 Nickel Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
B2 Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Hastelloy Alloy C276 Hex Bars
US $2000-3000 / Ton (FOB Price)
B3 Nickel Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Alloy C276 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI X Forged Hastelloy Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Hastelloy X Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C276 Bright Nickel Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
B2 Nickel Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright C276 Hastelloy Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Nickel Alloy B2 Bar & Hastelloy C22 Rods To More Than 30 Locations Worldwide, Check Hastelloy C22 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N06022 Bars In Kathmandu, Nepal.
Nickel Alloy C276 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, chemical application, agricultural irrigation, oil and gas industry, paper and pulp industry, shipyard, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
![]() ![]() Indonesia |
![]() ![]() Iran |
![]() ![]() Malaysia |
![]() ![]() Singapore |
![]() ![]() Iraq |
![]() ![]() Oman |
![]() ![]() Saudi Arabia |
![]() ![]() Qatar |
![]() ![]() Nigeria |
![]() ![]() UAE |
![]() ![]() Kenya |
![]() ![]() South Africa |