Niko Steel Centre is a prominent producer , supplier and stockiest of Hastelloy Bars in Singapore. These Hex Bars are accessible in variety grade and bespoken measurements to our customers. We have fixed advanced tools and technology, for fabricating these bars, which results in accurate and precise dimensions.
Hastelloy is considered a wrought Ni Cr and Mo alloy that is extensively regarded as the more suitable corrosion-resistant alloy. Hastelloy C22 Forged Bar is an ideal choice for general resistant to corrosion uses, Hastelloy B3 Rods are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are sold to our valued clients in several sizes, wall thicknesses, and at very reasonable rates. These Rods are widely used in the paper and pulp industries, as well as these Square Bars are in huge demand in digesters. They are also be found in equipment used for sour gas or flue gas desulfurization. These Hex Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
Table Of Content
These Hastelloy B3 Bright Bars are resistant to the fabrication of grain boundary caused during welding heat-affected zone, making it particular for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing environments up to 1900 degree F. Alloy C-276 is immensely resistant to a broad range of acidic environments. This Hastelloy B3 can be forged, hot-upset and impact extruded. Despite the fact that the alloy tends to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding procedures can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy X Bright Bar can also be utilized in industries where chlorine is often employed. In fact, the Rods are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in many industrial uses, Hastelloy B2 Square Bars are utilized in moist chlorine gas environments due to its resistance property.
Here at Niko Steel Centre test these products before they are sent to our customers, assuring that fabricated products don’t bear any destructions and are truly ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our B2 Hastelloy Alloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
C276 Hastelloy Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi B2 Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
C22 Hastelloy Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
C22 Hastelloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Hastelloy C276 Hex Bars
US $2000-3000 / Ton (FOB Price)
C276 Hastelloy Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy C276 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI C276 Forged Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Hastelloy Alloy X Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
C276 Bright Hastelloy Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
X Hastelloy Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright B3 Hastelloy Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Nickel Alloy C276 Bar & Nickel Alloy B3 Rods To More Than 30 Locations Worldwide, Check Hastelloy Alloy C22 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N10276 Bars In Yishun, Singapore.
Hastelloy Alloy B3 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, chemical application, agricultural irrigation, edible oil refinery factories, paper plants, shipyard, power generation, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |