Niko Steel Centre is a leading producer , supplier and exporter of Hastelloy Bars in Oman. These Rods are available in variety standard and customized dimensions to our customers. We have fixed advanced machinery, for producing these bars, which results in accurate and precise measurements.
Hastelloy is considered a wrought Ni Cr and Mo alloy that is widely regarded as the most suitable corrosion-resistant alloy. Hastelloy B3 Hexagon Bar is an ideal choice for general resistant to corrosion uses, Hastelloy B3 Square Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are available to our esteemed customers in several sizes, wall thicknesses, and at very reasonable rates. These Forged Bars are widely used in the paper and pulp factories, as well as these Hexagon Bars are in huge demand in digesters. They are also be found in machinery used for sour gas or flue gas desulfurization. These Bright Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy B3 Hexagon Bars are resistant to the fabrication of grain boundary caused during welding heat-affected zone, making it particular for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing areas up to 1900 degree Fahrenheit. Alloy C-276 is immensely resistant to a wide range of chemical environments. This Hastelloy C276 can be forged, hot-upset and impact extruded. Despite the fact that the alloy tends to work-harden, it may be deep-drawn, press shaped, or punched satisfactorily. All typical welding methods can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy B2 Bright Bar can also be utilized in industries where chlorine is often employed. In fact, the Square Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in several industrial uses, Hastelloy B3 Round Bars are used in moist chlorine gas areas because of their resistance property.
Here at Niko Steel Centre test these bars before they are offered to our clients, assuring that fabricated products don’t bear any damages and are truly ready for it’s functioning.
Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our C22 Hastelloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
X Nickel Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi X Nickel Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
C22 Nickel Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
C22 Nickel Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Alloy X Hex Bars
US $2000-3000 / Ton (FOB Price)
C276 Hastelloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Hastelloy Alloy B2 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI X Forged Nickel Alloy Bar Factory
US $1200-6000 / Ton (FOB Price)
Hastelloy Alloy B3 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
B3 Bright Hastelloy Round Bar
US $1000-3000 / Ton (FOB Price)
B2 Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright X Hastelloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Alloy C22 Bar & Alloy X Rods To More Than 30 Locations Worldwide, Check Nickel Alloy X Round Bar Schedule Chart, Compare Prices Before You Buy UNS N10665 Bars In Muscat, Oman.
Nickel Alloy B3 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, petrochemical application, agricultural irrigation, oil and gas industry, paper and pulp industry, shipyard, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |