Niko Steel Centre is a notable manufacturer, supplier and stockiest of Hastelloy Bars in Brazil. These Round Bars are available in many grade and customized measurements to our customers. We have installed modern machinery, for making these bars, which results in accurate and precise measurements.
Hastelloy is considered a wrought Nickel-Chromium-Molybdenum alloy that is widely regarded as the most adaptable corrosion-resistant alloy. Hastelloy C276 Bright Bar is an ideal choice for general resistant to corrosion uses, Hastelloy B3 Hex Bars are specified as a low carbon-based alloy that is widely used in the chemical processing sector. These are sold to our valued clients in a variety of diameters, widths, and at very fair rates. These Rods are extensively used in the paper and pulp industries, as well as these Forged Bars are in large-scale in digesters. They are also be found in equipment used for sour gas or flue gas desulfurization. These Round Bars can also be used in evaporators and heat exchangers, as well as filtration units and mixers.
These Hastelloy X Bright Bars are resistant to the fabrication of grain boundary caused during welding heat-affected zone, making it particular for most chemical process applications when welded. Alloy C-276 is also resistant to pitting, stress-corrosion cracking, and oxidizing environments up to 1900 ° F. Alloy C-276 is immensely resistant to a wide range of chemical conditions. This Hastelloy B3 can be forged, hot-upset and impact extruded. Despite the fact that the alloy contributes to work-harden, it may be deep-drawn, press shaped, or punched easily. All typical welding methods can be uses , albeit the oxyacetylene and submerged arc processes are not suggested when the produced item is to be used in corrosive service. The Hastelloy B3 Bright Bar can also be utilized in industries where chlorine is often employed. In fact, the Forged Bars are one such alloy that works well with hypochlorite and chlorine dioxide. Furthermore, in many industrial applications, Hastelloy X Rods are utilized in damp chlorine gas environments due to its resistance characteristic.
Here at Niko Steel Centre test these products before they are delivered to our customers, assuring that manufactured products do not have any destructions and are truly ready for it’s functioning.


| Standard | ASTM B335, B574, B572 / ASME SB335, SB574, SB572 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar Size | Diameter: 3-~800mm |
| Hex Bar Size | 2-100mm A/F |
| Square Bar Size | 4 to 100mm |
| Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Our B2 Nickel Alloy Round bar conforms to NACE MR0175/ISO 15156 | |


















ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply




We Are Supplying Hastelloy B2 Bar & Hastelloy B3 Rods To More Than 30 Locations Worldwide, Check Nickel Alloy C22 Round Bar Schedule Chart, Compare Prices Before You Buy UNS N10276 Bars In Brasília, Brazil.
Nickel Alloy C22 Bars are used in manufacturing Fasteners, construction materials, medical equipment, auto parts, petroleum, chemical application, agricultural irrigation, edible oil refinery factories, paper plants, shipyard, nuclear power plant, etc.


Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98199 96143
|
Indonesia |
Iran |
Malaysia |
|
Singapore |
Iraq |
Oman |
|
Saudi Arabia |
Qatar |
Nigeria |
|
UAE |
Kenya |
South Africa |