Niko Steel Centre produces, supplies, and stockists with premium quality Inconel Rods in Bangladesh, these Round Bars are fabricated using high-quality raw materials, which are made available from a well-known vendor.
There are many grades for this material which involving, 600, 625, 718, 800, 825, and others. Incoloy is a Nickel-Chromium super alloys, which is being commonly employed in higher temperature regions and has a formation of a thick, persistent passivation oxide layer when Inconel is heated.
This material has a make-up of chemicals that may extend according to the grades, The Nickel Chromium alloy in these 718 Round Bars large proportions of Fe, Cr, Mo as well as less Aluminum and Titanium. In comparison to other age hardening Ni alloys, this Inconel grade 825 provides relatively high weld ability, formability, and outstanding cryogenic characteristics.
As it has a moderate precipitation hardening reaction, these 800 Forged Bars also can be joint without stiffing or breaking. This Nonmagnetic Incoloy has stiff corrosion and oxidation immune and is appropriate for parts that need high creep and stress rupture resistance up to 1300 ° F and oxidation resistance up to 1800 ° F.
Table Of Content
These Incoloy 600 Rods are also known for their higher mechanical qualities and are mostly used in the chemical and aviation sectors. A broad variety of general uses of these Inconel alloy 825 Round Bars grades including, Jet Engine Components, Commercial Gas Turbines, Food Processing, Chemical Processing, and Petrochemical units etc.
Our rates are adequately reasonable and not expensive. A range of inspection is performed to ensure that the Incoloy 600 Round Bars fabricated by us is of finest quality. These tests estimate their preciseness, robustness, durability, reliability, pitting corrosive strength, sturdiness, etc.
The staff overseeing of the manufacturing unit is highly experienced and skilful in this field. We assure guarded packaging and on-time deliveries are guaranteed.
Standard | ASTM B166, B446, B425/ASME SB166, SB446, SB425 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our 800HT Incoloy Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
Inconel 718 Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi 800H Incoloy Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
Inconel Alloy 600 Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
Alloy 625 Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Inconel 718 Hex Bars
US $2000-3000 / Ton (FOB Price)
Inconel Alloy 600 Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Inconel Alloy 600 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI 625 Inconel Forged Inconel Bar Factory
US $1200-6000 / Ton (FOB Price)
Inconel Alloy 600 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
Inconel 718 Bright Inconel Round Bar
US $1000-3000 / Ton (FOB Price)
Alloy 825 Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright600 Alloy Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Alloy 800H Bar & Incoloy 600 Rods To More Than 30 Locations Worldwide, Check Incoloy Alloy 800H Round Bar Schedule Chart, Compare Prices Before You Buy Alloy UNS N08825 Bars In Dhaka, Bangladesh.
Incoloy 625 Bars are used in manufacturing Fasteners, construction materials, medical equipment, auto parts, petroleum, chemical application, agricultural irrigation, oil and gas industry, paper and pulp industry, marine applications, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
Indonesia |
Iran |
Malaysia |
Singapore |
Iraq |
Oman |
Saudi Arabia |
Qatar |
Nigeria |
UAE |
Kenya |
South Africa |