Niko Steel Centre offers Nickel Alloy Rods of top notch quality, and in several of measurements, dimensions, lengths, etc. We are a reputable manufacturer and supplier of these Nickel Alloy 200 Bars in Bangladesh, so we make use of the raw material which is made available from a prominent source. Quality is our main priority, thus we inspect these bars prior they are delivered to the buyers to see if they meet the products requirements.
These Hexagon Bars of Nickel 200 are made by fusing Ni as the main component with another material. It combines two materials to provide more beneficial properties such as greater robustness or resistant to corrosion. Due to its noticeable features, Nickel Alloy 201 Forged Bar is a most flexible material that is alloyed with a various of metals, including molybdenum, Cu, Cr, and Silicon.
The sustainable adaptability of the Hot Rolled Nickel 200 Square Bar , along with its remarkable resistance to heat and corrosion, has resulted in the Nickel Alloy Rods being employed in a wide variety of applications. The chemical composition restrictions for the alloying components employed, such as Nickel, Copper, Carbon, Iron, Manganese, Silicon, and Sulphur, must be met by the specified.
High purity Nickel 201 Rod is seen in a variety of commercial applications, including electronic and aviation machinery, chemical and food preparation equipment, caustics evaporators, anodes and cathodes, and heat shields.
Pure Nickel Alloy Hexagon Bars are also very resistant to caustic alkalies. Moreover, Ni Alloy 201 Rod is immune to both distilled and natural fluids. Some of the characteristics involve good fabric ability, noticeable robustness in high degrees, hardenability, immobility, oxidation opposition, stress corrosion and crevice corrosion resistance, high tensile strength, and so on.
Here testing of Nickel 200 Round Bars is given higher attention. This is done to ensure that no defected bars are given to consumers. We provide testing documents to our clients to verify that we do not supply a product containing all unnecessary chemicals. Our high-quality Square Bars are packaged with in proper sustainable to make sure safe and damage-free delivers to buyers.
Standard | ASTM B160 / ASME SB160 |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round bar Size | Diameter: 3-~800mm |
Hex Bar Size | 2-100mm A/F |
Square Bar Size | 4 to 100mm |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our 200 Nickel Round bar conforms to NACE MR0175/ISO 15156 |
ISO Certified
Largest Inventory
On Time Deliveries
Customer Support
Worldwide Supply
201 Alloy Round Bar
US $1-5 / Kilogram (FOB Price)
8mm, 15mm, 35mm, 55mm ansi 200 Alloy Round Bar
US $1500-7000 / Metric Ton (FOB Price)
201 Nickel Alloy Square Bar on Sale
US $1500-3000 / Ton (FOB Price)
201 Nickel Alloy Hex Bar for Nut Factory
US $1500-5000 / Ton (FOB Price)
Nickel Alloy 201 Hex Bars
US $2000-3000 / Ton (FOB Price)
201 Nickel Alloy Black Bar
US $1-5 / Kilogram (FOB Price)
Bright Finish Alloy 200 Threaded Bar
US $2000-3000 / Ton (FOB Price)
AISI 201 Forged Nickel Bar Factory
US $1200-6000 / Ton (FOB Price)
Alloy 200 Bar Cold Rolled
US $1000-3000 / Ton (FOB Price)
200 Bright Nickel Alloy Round Bar
US $1000-3000 / Ton (FOB Price)
200 Nickel Alloy Round Bar Cold Rolled
US $1500-3000 / Ton (FOB Price)
Cold Drawn Bright 200 Nickel Bar
US $400-500 / Metric Ton (FOB Price)
We Are Supplying Nickel 200 Bar & ASME SB160 Nickel 201 Rods To More Than 30 Locations Worldwide, Check Nickel 201 Round Bar Schedule Chart, Compare Prices Before You Buy ASME SB160 UNS N02201 Bars In Dhaka, Bangladesh.
Alloy 201 Bars are used in manufacturing Fasteners, construction materials, pharmaceutical industry, auto parts, petroleum, chemical application, agricultural irrigation, oil and gas industry, paper plants, marine applications, nuclear power plant, etc.
Products
REQUEST A QUOTE
Get in touch with us today to get the best quote for your requirement. We can assure you of the most competitive prices.
Call : +91 98206 90190
![]() ![]() Indonesia |
![]() ![]() Iran |
![]() ![]() Malaysia |
![]() ![]() Singapore |
![]() ![]() Iraq |
![]() ![]() Oman |
![]() ![]() Saudi Arabia |
![]() ![]() Qatar |
![]() ![]() Nigeria |
![]() ![]() UAE |
![]() ![]() Kenya |
![]() ![]() South Africa |